Alloys: Zamak 3 (ZL3, ZL0400, ZnAI4, alloy 3)
View
The regulator for Turner’s self-igniting torch has a design criteria specifying pressure tightness, strength, cleanliness and metal-chip free, net shape, and cost-effective manufacturing. A screw-machined aluminium or brass regulator was first considered, but both...
View
Initially, the Q-LOK design was all plastic for low-impact sports. However, for high-impact sports such as soccer and football, the added strength of zinc alloy was necessary to meet impact requirements. Die cast zinc provides the receptacles with superior corrosion...
View
Zinc alloy pressure die casting has been chosen by the IER company for the four parts that make up the structure of this ticket printer. The specification set by IER required materials and technology that would enable the production of: complex shapes, so that the...
View
This part, which replaced a machined steel part, required precision tolerances for the diameter of the bores and the spacing between them. Zinc casting also provided the required dimensional stability over time and permitted this complex shape to be cast in one piece...
View
The part is machined on guiding bores and reference faces. It substitutes for the pressed steel plate for several reasons: its high precision realized on machined diameters Ø < 0.02 mm and for the cost efficiency.
Page 3 of 11«12345...10...»Last »
