This high performance self-drilling insert for plaster board (partition, lining, ceiling) is delivered with a self-tapping screw, forming two parts (cap and toggle) produced in a single casting operation. The parts are connected by four 0.9 mm diameter pins, which...
The automatic force wedge shown is part of the additional locking devices of the mechanical-automatic door lock “Roto Safe A | Tandeo”. With this door lock, front doors can be locked automatically without using a key. In conjunction with an additional drive unit, the...
The Delta Faucet’s construction is known as shell technology. It features a die-cast zinc cover, or escutcheon, over a brazed copper and brass assembly. The thin zinc cover is much more uniform than brass; it provides near net shape die casting with tolerances of...
In the field of sanitary technology, extremely high demands are placed on the surface appearance, resistance and dimensional stability of the assemblies. A high standard of haptics conveys a high-quality feeling. With the casing of the Rainfinity overhead shower, the...
The zinc pressure die cast corner stake, fastened with pop rivets, fits tightly into the Galvabond roll form section of the door. It has to compete with plastic molded, aluminium extruded, and aluminium pressed parts’ this is because of the many properties of the zinc...
Today, bathrooms are no longer just places to shower, wash your hands or freshen up. Today, bathrooms are high-quality experience spaces and oases of well-being. Value is placed on good products with perfect surfaces. Function and control of cold and warm water...
Groß Druckguss GmbH received this award for the implementation of the housing shells and a head cap for ABUS-ECO locking cylinders. Products in the lock area are characterized by extremely low tolerance ranges and high accuracy of fit and precision. When manufacturing...
Smart Home is becoming an increasingly important part of our daily lives. A large number of household appliances, from dishwashers to water purifiers, can now be operated via smartphones. Why not also window and door fittings? With the innovative, fully electronic...
Alloy 3 was chosen as the end cap material because of the ease with which it is processed. Both material and tooling cost are minimized, and the product can be made with existing expertise and plant equipment. Alloy 3 castings can be produced with high dimensional...
The award-winning component is a large-scale application of die-cast zinc as a shower head. The large surface area of the cover rosette component of an overhead shower for the GROHE Rainshower series in connection with a galvanic surface treatment places special...
Zinc die cast pillars support two different heights of floor system. The first is a low height (60 – 100mm) system for cables only, and the second is higher (300 – 400mm), used for air ducts under the floor. Zinc die castings are designed for maximum strength....
Pictured is one model of a range of decorative door handles. Zinc is used for the design because of its ability to easily take a plated finish and because it can be cast to accurate dimensions.
A worm/helical gear set operates the linkage attached to the roof window frame. Originally, the helical gears were machined from brass, reinforced with a formed steel insert and installed with a plastic washer/spacer. The assembled gear’s cost became a factor when...
To meet market requirements, Medeco wanted to develop a new high security lock priced just below its top-of-the-line dropbolt lock. The high-end lock model is all brass. The housing cover is investment cast, and the thumbturn is a machined extrusion. As other...
The main feature of this lock design is that the handle is cast with a cylindrical shaped wall, but it is then post formed to a spherical shape. If the Alloy 3 used for this casting did not have high ductility, the final shape could not be achieved and the pressure...
A four-piece miter gear assembly utilized zinc die casting for strength and precision. Both pinion gear shafts and housing halves are die cast net-shape, achieving full functionality without a cost penalty compared to alternative designs (thermoplastic housing/gears...
The initial design brief for the slave lock was that it had to have suitable mechanical properties to meet security door standards, have minimum design complexity, and use the most logical material for its purpose. Initially a hybrid construction was considered, using...
The SUDHAUS key safe is a secure storage place for keys and other valuables. The dimensions were chosen so that bunches of keys and credit card formats can be stored. Areas of application include contactless key handover for holiday homes, rental car collection/return...
Special features of this die cast product include precise dimensions that ensure a perfect fit around the circumference of the housing, making it water-resistant so that the internal components are protected. The tool design allows for uniform filling and casting with...
This product is a cylindrical zinc pressure die cast component with an internally die cast thread that functions to tighten the fitting on an outdoor water hose. Zinc alloy no. 3 was chosen because of its stiffness and bright finish that is unaffected by ultraviolet...
Second Place, 2018 EU Zinc Die Casting Competition This part can be easily installed on site using clips with clamping ribs with a power input of 65 to 75 N. Predetermined breaking points with a defined break at 360 to 460 N allow disassembly if required. To ensure...